Number Plate Sticky Pads

Number Plate Sticky Pads – 10 Pack Double-Sided Adhesive Pads

Secure your number plates quickly and cleanly with our Number Plate Sticky Pads. Designed specifically for attaching number plates without drilling holes or using screws, these strong double-sided adhesive foam pads provide a simple and discreet way to mount your registration plates to your vehicle.

Each pack contains 10 double-sided number plate sticky pads, giving you plenty of adhesive pads for securely mounting a front and rear number plate.

With a strong adhesive backing and foam construction, our number plate fixing pads help create a firm bond between your number plate and mounting surface while keeping the front of your plates completely free from visible screws.

Whether you’re fitting standard printed plates, 3D Gel, 4D, 5D Gel, 4D Retro, Ghost or Obsidian Number Plates, these adhesive pads provide a clean and convenient fitting solution.

10 Pack Number Plate Sticky Pads

Each pack contains 10 individual double-sided adhesive pads.

This provides enough pads to distribute multiple fixing points across your number plates, helping create an even and secure attachment to the vehicle.

Simply position the pads across the rear of your number plate, remove the protective backing and firmly press the plate against a clean, dry mounting surface.

No drilling. No visible screws. Just a clean number plate installation.

Strong Double-Sided Number Plate Adhesive Pads

Our double-sided number plate sticky pads feature adhesive on both sides, allowing them to bond the rear of your registration plate directly to the vehicle’s number plate mounting area.

The foam construction helps accommodate small differences between the plate and mounting surface while creating a strong attachment when correctly installed.

They’re ideal for drivers who want a straightforward alternative to traditional number plate screws.

Why Choose Number Plate Sticky Pads?

Using adhesive pads gives your number plates a particularly clean appearance because there are no screw heads visible through the face of the plate.

Key features include:

✅ 10 Double-Sided Sticky Pads Per Pack
✅ Strong Adhesive Bond
✅ Double-Sided Foam Construction
✅ Designed for Number Plate Installation
✅ No Drilling Required
✅ No Visible Screws Through Your Plates
✅ Quick & Easy Installation
✅ Suitable for Front & Rear Number Plates
✅ Can Be Positioned to Suit Different Plate Sizes
✅ Ideal for Replacement & Custom Number Plates

Number Plate Sticky Pads Instead of Screws

Traditional number plate installation normally involves drilling holes through the acrylic and securing the plate using screws.

Number plate adhesive pads provide an alternative.

Because the pads attach behind the number plate, you don’t need visible screw heads passing through the front of your plate.

This can be particularly appealing when you’ve invested in premium 3D Gel, 4D, 5D Gel, 4D Retro, Ghost or Obsidian plates and want to keep the front surface looking as clean as possible.

Number Plate Sticky Pads for 3D & 4D Plates

Upgraded number plates deserve a clean installation.

Our number plate sticky pads can be used when fitting many of the number plate styles available from Driven Digits, including:

• Standard Printed Number Plates
• 3D Gel Number Plates
• 4D Number Plates
• 5D Gel Number Plates
• 4D Retro Number Plates
• Ghost Number Plates
• Obsidian / Staggered Number Plates
• Replacement Number Plates
• Show Plates

The pads are hidden behind the acrylic once installed, helping keep attention on the plate itself rather than the fixings.

Number Plate Adhesive Pads for Replacement Plates

Replacing damaged, cracked or faded registration plates?

Our double-sided number plate pads are an easy way to install your new replacement number plates without necessarily having to reuse existing screw holes.

They’re particularly useful when changing plate styles and you want a cleaner installation for your new plates.

Pair them with your Driven Digits road legal replacement number plates for a simple plate-and-fitting solution.

Weather-Resistant Number Plate Fixing Pads

Number plates are constantly exposed to changing outdoor conditions.

Our adhesive pads are designed to provide a strong, weather-resistant bond suitable for vehicle number plate installation. The current pads are described as resistant to rain, car washes and temperature changes. 

Correct surface preparation is extremely important to achieving the strongest possible bond.

How to Fit Number Plates With Sticky Pads

For the best results:

1. Remove the old number plate

Carefully remove your existing plate and any old adhesive, tape or fixing material.

2. Clean the mounting surface

Make sure both the rear of your number plate and the vehicle’s mounting area are thoroughly clean.

Any dirt, wax, grease or residue can reduce adhesive performance.

3. Dry both surfaces

The number plate and mounting area should be completely dry before installation.

4. Position the sticky pads

Apply multiple pads evenly across the rear of the number plate rather than concentrating them in one area.

5. Remove the backing

Carefully peel away the protective backing from the exposed side of each adhesive pad.

6. Position your number plate

Check the plate is correctly aligned before allowing the adhesive to make full contact with the vehicle.

7. Apply firm pressure

Press firmly and evenly across the number plate to help establish the adhesive bond.

Your existing instructions recommend applying pressure for approximately 30 seconds and allowing one hour before driving. 

How Many Number Plate Sticky Pads Do I Need?

Your pack contains 10 sticky pads, allowing you to distribute several fixing points across each plate.

The exact number required can depend on the size of the plate, mounting surface and installation.

The important thing is to position the pads evenly so the number plate is adequately supported rather than placing all of the adhesive in one small area.

Clean Number Plate Installation

One of the biggest advantages of double-sided number plate tape and sticky pads is appearance.

Visible screws can interrupt the clean surface of a new number plate. They also require holes to be drilled through the acrylic.

Adhesive fixing pads sit completely behind the number plate, providing an almost invisible mounting solution once fitted.

For customers upgrading to premium number plates, this helps produce a cleaner finished appearance.

Number Plate Sticky Pads vs Number Plate Magnets

Driven Digits also offers Number Plate Magnets for customers looking for a removable number plate mounting solution.

Sticky pads are better suited to customers wanting a straightforward, semi-permanent installation without visible screws.

Magnets are designed for customers who want the ability to remove and refit their number plates more easily.

Choose the fixing method that best suits how you use your vehicle.

What’s Included?

Each pack contains:

10 × Double-Sided Number Plate Sticky Pads

Enough to provide multiple fixing points across a front and rear number plate.

Number Plate Sticky Pads FAQs

What are number plate sticky pads?

Number plate sticky pads are double-sided adhesive foam pads designed to attach registration plates to a vehicle without requiring conventional screws through the face of the plate.

How many sticky pads are included?

Each Driven Digits pack contains 10 double-sided number plate adhesive pads.

Can I use sticky pads for 4D number plates?

Yes. Adhesive pads can provide a clean fitting solution for 4D Number Plates, subject to the mounting surface being suitable and properly prepared.

Can I use them for 3D Gel Number Plates?

Yes. Our sticky pads can be used to mount 3D Gel Number Plates without visible screw heads through the plate.

Can I use them with 4D Retro Plates?

Yes. They’re particularly useful for premium styles such as 4D Retro Number Plates, where you may prefer a clean installation without visible fixings.

Do number plate sticky pads require drilling?

No. One of the main advantages of adhesive number plate pads is that the plate can be attached without drilling fixing holes through it.

Are number plate sticky pads waterproof?

They’re designed for exterior automotive use and to resist normal exposure to rain and vehicle washing. Correct installation onto clean, suitable surfaces remains important.

Will number plate sticky pads work on every vehicle?

Adhesive performance depends on the mounting surface, its condition and how well it’s prepared. Clean, dry and relatively flat surfaces generally provide the best installation.

Can I remove number plate sticky pads?

Adhesive pads can be removed, although care should be taken when removing both the number plate and remaining adhesive. Avoid aggressively pulling against delicate painted surfaces.

Are these suitable for front and rear number plates?

Yes. The 10-pack provides enough pads to distribute multiple adhesive fixing points across both front and rear plates.

Order 10 Number Plate Sticky Pads

Give your number plates a clean, screw-free installation with Driven Digits Number Plate Sticky Pads.

Each pack contains 10 strong double-sided adhesive foam pads, providing a simple solution for fitting replacement and custom number plates without visible screws.

Perfect for use alongside our range of Printed, 3D Gel, 4D, 5D Gel, 4D Retro, Ghost and Obsidian Number Plates.

Order your 10 Pack Number Plate Sticky Pads today with fast UK delivery.